------------- INTRODUCTION: ------------- Last revision: 20-Oct-1996 This version corrects problems with building the XNTP version 3.5-86 distribution under Windows NT. The following files were modified: blddbg.bat bldrel.bat include\ntp_machine.h xntpd\ntp_unixclock.c xntpd\ntp_refclock.c scripts\wininstall\build.bat scripts\wininstall\setup.rul scripts\wininstall\readme.nt scripts\wininstall\distrib\ntpog.wri html\hints\winnt (this file) In order to build the entire Windows NT distribution you need to modify the file scripts\wininstall\build.bat with the installation directory of the InstallShield software. Then, simply type "bldrel" for non-debug or "blddbg" for debug executables. Greg Schueman Last revision: 07-May-1996 This set of changes fixes all known bugs, and it includes several major enhancements. Many changes have been made both to the build environment as well as the code. There is no longer an ntp.mak file, instead there is a buildntall.bat file that will build the entire release in one shot. The batch file requires Perl. Perl is easily available from the NT Resource Kit or on the Net. The multiple interface support was adapted from Larry Kahn's work on the BIND NT port. I have not been able to test it adequately as I only have NT servers with one network interfaces on which to test. Enhancements: * Event Logging now works correctly. * Version numbers now work (requires Perl during build) * Support for multiple network interface cards (untested) * NTP.CONF now default, but supports ntp.ini if not found * Installation procedure automated. * All paths now allow environment variables such as %windir% Bug fixes: * INSTSRV replaced, works correctly * Cleaned up many warnings * Corrected use of an uninitialized variable in XNTPD * Fixed ntpdate -b option * Fixed ntpdate to accept names as well as IP addresses (Winsock WSAStartup was called after a gethostbyname()) * Fixed problem with "longjmp" in xntpdc/ntpdc.c that caused a software exception on doing a Control-C in xntpdc. A Cntrl-C now terminates the program. See below for more detail: Note: SIGINT is not supported for any Win32 application including Windows NT and Windows 95. When a CTRL+C interrupt occurs, Win32 operating systems generate a new thread to specifically handle that interrupt. This can cause a single-thread application such as UNIX, to become multithreaded, resulting in unexpected behavior. Possible enhancements and things left to do: * Reference clock drivers for NT (at least Local Clock support) * Control Panel Applet * InstallShield based installation, like NT BIND has * Integration with NT Performance Monitor * SNMP integration * Fully test multiple interface support Known problems: * bug in ntptrace - if no Stratum 1 servers are available, such as on an IntraNet, the application crashes. Last revision: 12-Apr-1995 This NTPv3 distribution includes a sample configuration file and the project makefiles for WindowsNT 3.5 platform using Microsoft Visual C++ 2.0 compiler. Also included is a small routine to install the NTP daemon as a "service" on a WindowsNT box. Besides xntpd, the utilities that have been ported are ntpdate and xntpdc. The port to WindowsNT 3.5 has been tested using a Bancomm TimeServe2000 GPS receiver clock that acts as a strata 1 NTP server with no authentication (it has not been tested with any refclock drivers compiled in). Following are the known flaws in this port: 1) currently, I do not know of a way in NT to get information about multiple network interface cards. The current port uses just one socket bound to INADDR_ANY address. Therefore when dealing with a multihomed NT time server, clients should point to the default address on the server (otherwise the reply is not guaranteed to come from the same interface to which the request was sent). Working with Microsoft to get this resolved. 2) There is some problem with "longjmp" in xntpdc/ntpdc.c that causes a software exception on doing a Control-C in xntpdc. Be patient! 3) The error messages logged by xntpd currently contain only the numerical error code. Corresponding error message string has to be looked up in "Books Online" on Visual C++ 2.0 under the topic "Numerical List of Error Codes". ---------------------------------------------------- MAKING XNTPD FOR WindowsNT 3.5 using Visual C++ 2.0: ---------------------------------------------------- Separate projects are needed for xntpd, ntpdate, xntpdc, and the library containing routines used by them. 1) First build the static library composed of routines in the lib subdirectory of the distribution. Load the project by opening the corresponding makefile libntp.mak (in the lib subdirectory of the distribution) by choosing the Open option in the File menu. This should display a list of files contained in this project. Then choose the "Rebuild All" option from the Project menu in order to compile the routines into a library. The libntp.lib static library is created in the lib/WinDebug directory You can now choose to build xntpd, ntpdate, and xntpdc in any order. 2) To build xntpd, load the project by opening the corresponding makefile xntpd.mak (in the xntpd subdirectory of the distribution), and rebuild all files. The xntpd.exe executable is created in the xntpd/WinDebug directory. 3) repeat the above step for ntpdate and xntpdc ------------------------------------------------- INSTALLING XNTPD AS A SERVICE UNDER WindowsNT 3.5 ------------------------------------------------- At this point you need to install 'xntpd' as a service. First modify the sample configuration file conf/config.winnt35 in the distribution to suit your needs. Then install it as "%SystemRoot%\NTP.INI" (%SystemRoot% is an environmental variable that can be determined by typing "set" at the "Command Prompt" or from the "System" icon in the "Control Panel", NTP.INI is the suggested name for the "ntp.conf" file in Windows environment). The instsrv.c program in the util subdirectory of the distribution can be used to install 'xntpd' as a service and start automatically at boot time. Compile instsrv.c, and enter form the command prompt "instsrv.exe NetWorkTimeProtocol " Clicking on the "Services" icon in the "Control Panel" ("Main" group in the "Program Manager") will display the list of currently installed services in a dialog box. The NetworkTimeProtocol service should show up in this list. Select it in the list and hit the "Start" button in the dialog box. The NTP service should start. View the event log by clicking on the "Event Viewer" icon in the "Administrative Tools" group of the "Program Manager", there should be several successful startup messages from NTP. NTP will keep running and restart automatically when the machine is rebooted. You can change the start mode (automatic/manual) and other startup parameters correponding to the NTP service (eg. location of conf file) also in the "Services" dialog box if you wish. There is no clean way to run 'ntpdate' before starting 'xntpd' at boot time, unlike the Unix environment. 'xntpd' will step the clock upto a 1000 seconds. While there is no reason that the system clock should be that much off during bootup if 'xntpd' was running before bootup, you may want to increase the CLOCK_WAYTOOBIG parameter in include/ntp.h from 1000 to, say, MAXINT. You can also use instsrv.c to delete the NTP service "instsrv.exe NetworkTimeProtocol remove" Viraj Bais